WAGO
750-634 
INCREMENTAL ENCODER INTERFACE MODULE 
24 V

THIS MODULE IS AN INTERFACE FOR INCREMENTAL ENCODERS WITH STANDARD CONNECTIONS. A COUNTER WITH QUADRATURE DECODER AS WELL AS A LATCH FOR THE ZERO IMPULSE CAN BE READ OR ENABLED BY THE CONTROLLER. THE CONTROLLER CAN SET THE COUNTER OR TRANSMIT THE COUNTER VALUE TO THE LATCH. DEPENDING ON THE OPERATING MODE, THE COUNTER VALUE IS ADDED TO THE LATCH REGISTER ON A POSITIVE EDGE AT THE “C” OR “LATCH” INPUT.

THE RATE (INCREMENTS/MS) IS AUTOMATICALLY ACQUIRED AND CAN ALSO BE TRANSMITTED TO THE CONTROLLER AS AN ALTERNATIVE TO THE LATCH VALUE.

A COUNTER LOCK-OUT IS POSSIBLE USING THE “GATE” INPUT. INPUT “REF“ CAN BE USED TO ACTIVATE THE INITIAL POINT “C“ FUNCTION.